| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.250 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 3.000 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.672 INCHES MINIMUM AND 0.702 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.437 INCHES NOMINAL |
| FIRST LEG WIDTH | 5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CUTOUT LENGTH | 1.500 INCHES MINIMUM AND 1.620 INCHES MAXIMUM |
| SECOND LEG CUTOUT WIDTH | 1.500 INCHES MINIMUM AND 1.620 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.437 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM |
| SECOND LEG LENGTH | 3.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CUT OUT |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-52192 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-P-53030 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER EPOXY |