| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.620 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.190 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG ANGLE | 118.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.522 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.260 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.156 INCHES NOMINAL |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG END WIDTH | 1.100 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.600 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SECOND LEG CUTOUT LENGTH | 0.400 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 0.640 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.800 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.860 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.582 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.120 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.040 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CUT OUT |
| SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |