| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.375 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.340 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A,FINISH 1 FED SPEC SINGLE MATERIAL RESPONSE OR AISI 304 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SECOND LEG CORNER RADIUS | 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 0.625 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 0.875 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.470 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.060 INCHES MINIMUM AND 3.120 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SPECIAL FEATURES | CENTER HOLE IN SECOND LEG THREADED 0.112-40 UNC-2B |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |