| CENTER SECTION HEIGHT | 5.380 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.188 INCHES NOMINAL |
| CENTER SECTION WIDTH | 3.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.470 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.188 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.250 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.123 INCHES NOMINAL |
| FIRST LEG OFFSET ANGLE | 90.0 DEGREES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-631 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1010 |
| SECOND LEG ANGLE | 73.0 DEGREES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.340 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.435 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.188 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.938 INCHES NOMINAL |
| SECOND LEG OFFSET ANGLE | 73.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-636 MIL SPEC 1ST TREATMENT RESPONSE AND TT-E-529 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND ENAMEL |