| CENTER SECTION HEIGHT | 1.470 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.094 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.460 INCHES MINIMUM AND 1.480 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.094 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.350 INCHES MINIMUM AND 1.410 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.760 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.265 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.094 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.770 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SPECIAL FEATURES | FIRST LEG HAS 0.201 IN. MIN 0.212 IN MAX DIA HOLE SPACED 0.950 IN. FROM END; CENTRAL RISER HAS 0.875 IN. DIA HOLE AND FOUR 0.126 IN. MIN 0.133 IN. MAX DIA HOLES |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |