| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 20.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 9.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 12.5 MILLIMETERS NOMINAL |
| FIRST LEG END WIDTH | 30.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG THICKNESS | 3.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 50.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 40.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 3145 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 23.0 MAJOR INCHES |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 23.0 MILLIMETERS NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG END WIDTH | 30.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 3.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 8.5 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 13.5 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 3.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 55.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 50.0 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | ONE ADDITIONAL HOLE 25.0 MM DIA LOCATED ON SECOND LEG 20.0 MM FROM EDGE |
| STYLE DESIGNATOR | ANGLE |