| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG END WIDTH | 1.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.685 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.375 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.620 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| MATERIAL | ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5083 |
| SPECIAL FEATURES | ADDITIONAL SLOT ON SECOND LEG 3.750 IN. LG BY 0.312 IN. WIDE; COLOR GREEN NUMBER 24533 IF ENAMEL FINISH OR LIGHT GREEN IF LACQUER FINISH |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 2.220 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 11.875 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 2.500 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.312 INCHES NOMINAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG END WIDTH | 1.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG THICKNESS | 0.375 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-529,CLA FED SPEC 1ST TREATMENT RESPONSE OR MIL-L-52043 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL SEMIGLOSS OR LACQUER |