| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.450 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.414 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.800 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.450 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.950 INCHES NOMINAL |
| FIRST LEG STYLE | CUT OUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES |
| MATERIAL | STEEL COMP 1141 OR STEEL COMP 4140 OR STEEL COMP 4130 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.875 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.900 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 2.250 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG END RADIUS | 1.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG THICKNESS | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | G-4342-M CODE 30U40,CAGEC 73342 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ZINC |