|
|
|
National Stock Number:
5340-01-259-0274
Federal Supply Class:
5340
National Item Identification Number:
012590274
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 5934081 | 34623 | AM GENERAL LLC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 4.810 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.188 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.000 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.406 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.188 INCHES NOMINAL | | FIRST LEG WIDTH | 2.000 INCHES NOMINAL | | FIRST LEG LENGTH | 1.318 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | MATERIAL | STEEL COMP 1008 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.560 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL | | SECOND LEG LENGTH | 2.940 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.468 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.188 INCHES NOMINAL | | SECOND LEG WIDTH | 2.000 INCHES NOMINAL | | STYLE DESIGNATOR | OFFSET DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-636 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER |
|
|