| CENTER SECTION HEIGHT | 3.120 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.100 INCHES NOMINAL |
| CENTER SECTION WIDTH | 5.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG END WIDTH | 5.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.310 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.100 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 7.500 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS W/ TONGUE |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209,H32 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| REINFORCEMENT METHOD | TURNED EDGE |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.380 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 8.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.310 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.100 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.500 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST LEG SQUARE EDGE CENTER SECTION HAS FOUR SLOTS 0.500 IN. LG,0.310 IN. W,TWO HOLES 0.685 IN. MIN,0.697 IN. MAX DIA |
| STYLE DESIGNATOR | ADJACENT ANGLES |