|
|
|
National Stock Number:
5340-01-261-0846
Federal Supply Class:
5340
National Item Identification Number:
012610846
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 13082200-2 | 04939 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 4.771 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.500 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.291 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.315 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 RADIANS NOMINAL | | FIRST LEG LENGTH | 1.780 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.112 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.500 INCHES NOMINAL | | FIRST LEG WIDTH | 0.650 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T651 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE TYPE | THREADED AND PLAIN | | SECOND LEG ANGLE | 90.0 RADIANS NOMINAL | | SECOND LEG LENGTH | 1.890 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.800 INCHES NOMINAL | | SECOND LEG WIDTH | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | 0.375 IN. MIN AND 0.377 IN. MAX HOLE DIA; HOLE IS ON SIDE OF LEG | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE ZINC |
|
|