|
|
|
National Stock Number:
5340-01-272-8363
Federal Supply Class:
5340
National Item Identification Number:
012728363
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 68A112323-2011 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.470 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.060 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES NOMINAL | | FIRST LEG END WIDTH | 1.280 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.172 INCHES MAXIMUM | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.630 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.480 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE AND TAPERED | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG LENGTH | 0.780 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 33.0 DEGREES NOMINAL | | SECOND LEG END WIDTH | 1.480 INCHES NOMINAL | | SECOND LEG LENGTH | 0.950 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SECOND LEG WIDTH | 2.060 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CHAMFERED ENDS | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|