|
|
|
National Stock Number:
5340-01-273-1685
Federal Supply Class:
5340
National Item Identification Number:
012731685
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 114602-1 | 82340 | L3HARRIS TECHNOLOGIES, INC. | | 114602-1 | 9Y580 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.090 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG END WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | ANGLE | | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL | | FIRST LEG WIDTH | 2.530 INCHES NOMINAL | | FIRST LEG LENGTH | 2.310 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG END WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL | | SECOND LEG WIDTH | 3.810 INCHES NOMINAL | | SECOND LEG LENGTH | 3.690 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | ANGLE | | SPECIAL FEATURES | THREE HOLES ON CENTER SECTION,FIRST HOLE 1.120 IN. DIA,SECOND HOLE 1.250 IN. DIA,THIRD HOLE 1.310 IN. DIA; ONE FASTENER RIVETED ON CENTER SECTION | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|