|
|
|
National Stock Number:
5340-01-273-5975
Federal Supply Class:
5340
National Item Identification Number:
012735975
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 8432622 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.375 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.625 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.750 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG END RADIUS | 1.000 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.531 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.000 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.250 INCHES NOMINAL | | FIRST LEG WIDTH | 2.000 INCHES NOMINAL | | FIRST LEG LENGTH | 2.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-11415 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG THICKNESS | 0.250 INCHES NOMINAL | | SECOND LEG LENGTH | 1.687 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SPECIAL FEATURES | CENTER SECTION THICKNESS LISTED IS AT FIRST LEG,THEN SLANTED 18 DEGREES 30 MINUTES;2 HOLES 0.531 IN. DIA IN LINE | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|