| SECOND LEG HOLE DIAMETER | 0.300 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.940 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 RADIANS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.560 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.940 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.380 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.190 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.880 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.690 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 1.120 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-250/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 3.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG THICKNESS | 0.190 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.880 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.750 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SPECIAL FEATURES | PROTECTIVE FINISH PER PARAGRAPH 2.4 EXTERIOR PAINT SYSTEM DRAWING 12350824 |
| STYLE DESIGNATOR | ANGLE |