|
|
|
National Stock Number:
5340-01-273-9500
Federal Supply Class:
5340
National Item Identification Number:
012739500
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 31-15-2897 | 81361 | EDGEWOOD CHEMICAL BIOLOGICAL CENTER ECBC |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.620 INCHES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG WIDTH | 0.620 INCHES NOMINAL | | MATERIAL | STEEL COMP 301 | | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | SECOND LEG LENGTH | 0.424 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.233 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL | | SECOND LEG WIDTH | 0.620 INCHES NOMINAL | | SECOND LEG OFFSET ANGLE | 60.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG SLOT LENGTH | 0.281 INCHES NOMINAL | | SECOND LEG SLOT WIDTH | 0.078 INCHES NOMINAL | | SECOND LEG STYLE | CHAMFERED ENDS | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,CLASS 4 MIL STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | OXIDE |
|
|