| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.276 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.724 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.276 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.980 INCHES MINIMUM AND 4.020 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.570 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,ALLOY 6061-T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG LENGTH | 0.920 INCHES MINIMUM AND 0.950 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.980 INCHES MINIMUM AND 4.020 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | F+5025,TY 27,CL C,GARRETT TURBINE ENGINE CO MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PAINT |