| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 5.0 MILLIMETERS NOMINAL |
| FIRST LEG END WIDTH | 71.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 64.9 MILLIMETERS MINIMUM AND 65.1 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 13.5 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 2.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 2.4 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 27.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 75.0 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | 2ND LEG HAS THREE MTG HOLES |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 30.9 MILLIMETERS MINIMUM AND 31.1 MILLIMETERS MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 20.5 MILLIMETERS NOMINAL |
| SECOND LEG END WIDTH | 65.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE DIAMETER | 2.4 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 9.5 MILLIMETERS NOMINAL |
| SECOND LEG THICKNESS | 2.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 75.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 53.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |