| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.310 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.169 INCHES MINIMUM AND 0.174 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.500 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.620 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 T3 FED SPEC ALL MATERIAL RESPONSES |
| MATERIAL | ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CORNER RADIUS | 0.120 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG LENGTH | 0.880 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM |
| SPECIAL FEATURES | TWO CORNER JOGGLES,0.060 IN. BY 0.170 IN. |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC ALL TREATMENT RESPONSES |
| SURFACE TREATMENT | PLASTIC EPOXY AND PLASTIC POLYAMIDE |