|
|
|
National Stock Number:
5340-01-277-5034
Federal Supply Class:
5340
National Item Identification Number:
012775034
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| A3014549 | 31550 | L3HARRIS TECHNOLOGIES, INC. | | A3014549 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | A3014549-1 | 31550 | L3HARRIS TECHNOLOGIES, INC. | | A3014549-1 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 5.000 INCHES NOMINAL | | FIRST LEG ANGLE | 116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 5.000 INCHES NOMINAL | | FIRST LEG LENGTH | 7.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SECOND LEG ANGLE | 116.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG LENGTH | 7.500 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SPECIAL FEATURES | BOTH LEGS HAVE A 120.0 DEG TURNED EDGE; ONE 1.000 IN. DIA HOLE LOCATED ON EACH TURNED EDGE; ONE 0.344 IN. DIA HOLE LOCATED ON EACH RIB STIFFENER | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|