|
|
|
National Stock Number:
5340-01-282-9334
Federal Supply Class:
5340
National Item Identification Number:
012829334
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 11568186 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 11568186 | 26772 | WEGO PRECISION MACHINE, INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.000 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.188 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.375 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG THICKNESS | 0.188 INCHES NOMINAL | | FIRST LEG WIDTH | 0.375 INCHES NOMINAL | | FIRST LEG LENGTH | 0.563 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.187 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.187 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.177 INCHES NOMINAL | | SECOND LEG LENGTH | 0.625 INCHES NOMINAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.281 INCHES NOMINAL | | SECOND LEG WIDTH | 0.375 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | TEST DATA DOCUMENT | 18876-11568186 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|