|
|
|
National Stock Number:
5340-01-283-5900
Federal Supply Class:
5340
National Item Identification Number:
012835900
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 102062-3 | 01413 | AIR LOGISTICS CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 6.190 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.156 INCHES NOMINAL | | CENTER SECTION WIDTH | 69.000 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG THICKNESS | 0.156 INCHES NOMINAL | | FIRST LEG WIDTH | 69.000 INCHES NOMINAL | | FIRST LEG LENGTH | 2.500 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5-T3 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 7.235 INCHES MINIMUM AND 7.265 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.280 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.620 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 2.500 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.156 INCHES NOMINAL | | SECOND LEG WIDTH | 69.000 INCHES NOMINAL | | SPECIAL FEATURES | FIRST LEG TWO MTG HOLES 0.192 IN. MIN 0.196 IN. MAX DIA AND FOUR MTG HOLES 0.264 IN. MIN 0.269 IN. MAX DIA; CENTER LEG EIGHT MTG HOLES 0.264 IN. MIN 0.269 IN. MAX DIA,TWO MTG HOLES 0.065 IN. MIN 0.071 IN. MAX DIA,THREE MTG HOLES 0.280 IN. MIN 0.287 IN. MAX DIA; BEND RADIUS 0.650 IN.; STENCIL LEGEND READS HANDBOOK INSIDE W/ARROW POINTER | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALPS P-6,01413 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PAINT |
|
|