| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.968 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.968 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.361 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.326 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.620 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.690 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.125 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.880 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.191 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.880 INCHES NOMINAL |
| SPECIAL FEATURES | EXTENDED LEG ON SIDE OF SECOND LEG FURN W/TWO HOLES 0.191 IN. MIN. 0.199 IN. MAX DIA,1.500 IN. LG,2.380 IN. W,0.090 IN. THK |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |