| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.228 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.187 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.260 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.000 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.187 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.260 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ZINC AND CHROMATE |