| CENTER SECTION HEIGHT | 4.807 INCHES MINIMUM AND 4.817 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL |
| CENTER SECTION WIDTH | 3.120 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.780 INCHES NOMINAL |
| FIRST LEG END RADIUS | 1.560 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.266 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.970 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.560 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.590 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.120 INCHES NOMINAL |
| FIRST LEG LENGTH | 6.560 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 6.560 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST AND SECOND LEG HAVE ONE 0.386 IN. DIA HOLE; CENTER SECTION HAS ONE 2.000 IN. DIA HOLE |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC EPOXY |