| CRITICALITY CODE JUSTIFICATION | ZZZY |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.169 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.550 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.700 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.200 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.100 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.550 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.218 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.700 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.100 INCHES NOMINAL |
| SPECIAL FEATURES | FASTNER,SELF CLINCHING |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | M.1.5-11,CAGEC 94271 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |