| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG END RADIUS | 62.750 INCHES MINIMUM AND 66.750 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG WIDTH | 10.480 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.032 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | ANGLE IS BENT AT 62.000 IN. MIN,66.000 IN. MAX RADIUS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 9.480 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 3.160 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.410 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 3.160 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.880 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.169 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| SECOND LEG STYLE | EXTENDED FLAT |
| SECOND LEG THICKNESS | 0.032 INCHES NOMINAL |
| SECOND LEG WIDTH | 10.480 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 595,YELLOW,NUMBER 13538 FED STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL |