|
|
|
National Stock Number:
5340-01-292-1464
Federal Supply Class:
5340
National Item Identification Number:
012921464
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 128WS10628-16 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 128WS10628-16 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.130 INCHES MINIMUM AND 2.190 INCHES MAXIMUM | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CORNER RADIUS | 0.125 INCHES NOMINAL | | FIRST LEG LENGTH | 0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.250 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/13,T6 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | ALUMINUM ALLOY 7075 AND ALUMINUM ALLOY 7072 | | MOUNTING HOLE TYPE | PLAIN | | REINFORCEMENT METHOD | TURNED EDGE | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SPECIAL FEATURES | SECOND LEG ONE HOLE 0.242 IN. DIA | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|