| CENTER SECTION WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| CENTER SECTION HEIGHT | 0.930 INCHES MINIMUM AND 0.950 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.195 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.520 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| REINFORCEMENT METHOD (NON-CORE) | GUSSET BOTH LEGS |
| REINFORCEMENT METHOD (NON-CORE) | GUSSET BOTH SIDES |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.313 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.212 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |