| CENTER SECTION HEIGHT | 5.120 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL |
| CENTER SECTION WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.260 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.406 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.500 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.920 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6 H323 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/7 H32 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.505 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.870 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.570 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.190 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |