| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.440 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.406 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.250 INCHES NOMINAL |
| FIRST LEG LENGTH | 3.190 INCHES MINIMUM AND 3.310 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.530 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.250 INCHES NOMINAL |
| SECOND LEG END WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.406 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 6.940 INCHES MINIMUM AND 7.060 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYURETHANE |