| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.217 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.180 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.312 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.378 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.180 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.750 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SPECIAL FEATURES | 0.646 IN. MIN AND 0.666 IN. MAX HOLE DIA; 0.750 IN. FROM EDGE TO HOLE CENTER ALONG W AND 1.000 IN. FROM EDGE TO HOLE CENTER ALONG LG OF SECONDED LEG; 0.139 IN. MIN AND 0.144 IN. MAX HOLE DIA TWO PLACES; 0.532 IN. FROM EDGE ALONG THE LG TO HOLE CENTER AND 0.750 FROM EDGE TO HOLE CENTER ALONG THE W,SECOND HOLE IS 0.750 IN. TO HOLE CENTER ALONG THE W AND 1.469 IN. TO HOLE CENTER ALONG THE LG; COLOR YELLOW |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE ZINC |