| BODY THICKNESS | 0.050 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| CORNER BEVEL LENGTH | 0.120 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | FLAT |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 2.337 INCHES NOMINAL AND 2.340 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 1.500 INCHES NOMINAL AND 1.917 INCHES NOMINAL |
| DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH | 2.263 INCHES NOMINAL |
| DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH | 0.828 INCHES NOMINAL |
| FEATURES PROVIDED | SPECIAL MARKING |
| HOLE QUANTITY ALONG LENGTH | 16 |
| HOLE QUANTITY ALONG WIDTH | 12 |
| LENGTH | 20.900 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 T651 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING OPENING SHAPE STYLE | UNTHREADED HOLE |
| PERIPHERAL SHAPE STYLE | RECTANGLE, MULTI HOLES |
| SECURING DEVICE TYPE | THREADED FASTENER |
| SPECIAL FEATURES | ITEM HAS 6 HOLES THAT ARE CBORED 0.422 IN.,HOLES ARE LOCATED NEAR THE CNTR OF THE COVER; ITEM REQUIRES 34 SCREWS P/N 965858-1C,2 INSTRUCTION WARNING LABELS P/N 3282256-2 & 3282256-7,2 ABSORBERS P/N 5002609-1 & 5002609-2; EACH END OF THE TOP SURFACE IS ANODIZED PER MIL-A-8625 TYPE 3,0.0020 IN. THK PORM 0.005 IN.,EACH END IS FREE OFPAINT AND ALL THREADED FASTENERS SHALLBE FREE OF EPOXY PRIMER AND TOPCOAT |
| WIDTH | 10.970 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 TYPE 1 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-C-22750 TYPE 1 MIL SPEC 3RD TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE AND PRIMER AND PAINT EPOXY |