|
|
|
National Stock Number:
5340-01-298-4862
Federal Supply Class:
5340
National Item Identification Number:
012984862
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| SS1050-2 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG END WIDTH | 0.260 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.098 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.370 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL | | FIRST LEG WIDTH | 0.620 INCHES NOMINAL | | FIRST LEG LENGTH | 0.750 INCHES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,TEMPER O FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL | | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.620 INCHES NOMINAL | | SECOND LEG LENGTH | 1.560 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG END WIDTH | 0.260 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.098 INCHES NOMINAL | | SECOND LEG STYLE | CHAMFERED ENDS | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SECOND LEG WIDTH | 0.620 INCHES NOMINAL | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE OR CHROMATE |
|
|