|
|
|
National Stock Number:
5340-01-298-9693
Federal Supply Class:
5340
National Item Identification Number:
012989693
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 5599812-9 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5599812-9 | 5D286 | LOCKHEED MARTIN CORP LOCKHEED MARTIN LABORATORIES M/P 24 |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 3.770 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.000 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG END WIDTH | 2.400 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.390 INCHES MINIMUM AND 0.397 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.400 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.375 INCHES NOMINAL | | FIRST LEG WIDTH | 3.200 INCHES NOMINAL | | FIRST LEG LENGTH | 2.130 INCHES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A514, GRADE F, UNS K11576 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A514, GRADE B, UNS K11630 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A514, GRADE H, UNS K11646 ASSN STD 3RD MATERIAL RESPONSE | | MATERIAL | STEEL | | MOUNTING HOLE TYPE | PLAIN AND COUNTERSUNK | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 2.130 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE DIAMETER | 0.390 INCHES MINIMUM AND 0.397 INCHES MAXIMUM | | SECOND LEG THICKNESS | 0.250 INCHES NOMINAL | | SECOND LEG WIDTH | 3.200 INCHES NOMINAL | | SPECIAL FEATURES | FOUR HOLES 0.280 IN. MIN,0.286 IN. MAX DIA; 1.250 IN. C TO C DIST BTWN HOLES ALONG W OF C SECTION,2.350 IN. C TO C DIST BTWN HOLES ALONG LG OF C SECTION | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | WS19201,GP A,CAGEC 53711 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PAINT |
|
|