5340-01-302-5973, BRACKET,DOUBLE ANGLE

3110-01-302-5974 CONE AND ROLLERS,TAPERED ROLLER

National Stock Number:
5340-01-302-5973

Federal Supply Class:
5340

National Item Identification Number:
013025973

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

12356969

19207

U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM

Techincal Specification:

CENTER SECTION HEIGHT	1.4993 INCHES NOMINAL
CENTER SECTION THICKNESS	0.1793 INCHES NOMINAL
CENTER SECTION WIDTH	14.500 INCHES NOMINAL
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FIRST LEG CUTOUT LENGTH	1.030 INCHES NOMINAL
FIRST LEG CUTOUT WIDTH	1.440 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.750 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
FIRST LEG HOLE DIAMETER	0.406 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	5.000 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.750 INCHES NOMINAL
FIRST LEG STYLE	CUT OUT
FIRST LEG THICKNESS	0.1793 INCHES NOMINAL
FIRST LEG WIDTH	14.500 INCHES NOMINAL
FIRST LEG LENGTH	2.1793 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A569 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A109 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A109 ASSN STD 3RD MATERIAL RESPONSE
MATERIAL	STEEL COMP 1009 OR STEEL COMP 1137 OR STEEL UNS K01507
MOUNTING HOLE TYPE	PLAIN
SECOND LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	3.875 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE	FOUR HOLES
SECOND LEG HOLE DIAMETER	0.406 INCHES NOMINAL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	12.875 INCHES NOMINAL
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH	3.875 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.500 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.555 INCHES NOMINAL
SECOND LEG THICKNESS	0.1793 INCHES NOMINAL
SECOND LEG WIDTH	14.500 INCHES NOMINAL
SECOND LEG LENGTH	2.440 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG STYLE	SQUARE
STYLE DESIGNATOR	DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	PLASTIC POLYURETHANE

Click here to Register for Free 30-day Trial