|
|
|
National Stock Number:
5340-01-303-1323
Federal Supply Class:
5340
National Item Identification Number:
013031323
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 9326095 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.854 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.260 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.810 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.159 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.880 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.190 INCHES NOMINAL | | FIRST LEG STYLE | EXTENDED FLAT | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | FIRST LEG WIDTH | 1.260 INCHES NOMINAL | | FIRST LEG LENGTH | 0.770 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,5052-H34 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.770 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|