| FIRST LEG ANGLE | 106.85 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.594 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.846 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 3 SLOTS |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.594 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.250 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.437 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 4.880 INCHES NOMINAL |
| FIRST LEG LENGTH | 3.000 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 1.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CUTOUT LENGTH | 2.560 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 1.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.891 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.375 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.494 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 4.880 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.380 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 1.235 INCHES MINIMUM AND 1.387 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.425 INCHES MINIMUM AND 0.498 INCHES MAXIMUM |
| SECOND LEG STYLE | CUT OUT |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM AND CHROMATE |