|
|
|
National Stock Number:
5340-01-304-9582
Federal Supply Class:
5340
National Item Identification Number:
013049582
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 4560141 | 81039 | WHIPPANY ACTUATION SYSTEMS, LLC |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.705 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.6686 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.0218 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.340 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES MINIMUM AND 0.354 INCHES MAXIMUM | | FIRST LEG ANGLE | 88.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.198 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | FIRST LEG WIDTH | 0.705 INCHES NOMINAL | | FIRST LEG LENGTH | 3.2618 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.0218 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,1/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 88.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.0218 INCHES NOMINAL | | SECOND LEG LENGTH | 3.2618 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | S118,CAGEC 81039 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|