| CENTER SECTION HEIGHT | 0.570 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL |
| CENTER SECTION WIDTH | 1.000 INCHES NOMINAL |
| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 1230 AND ALUMINUM ALLOY 2024 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYAMIDE |