| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CUTOUT LENGTH | 0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| FIRST LEG CUTOUT WIDTH | 1.140 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.438 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.150 INCHES NOMINAL |
| FIRST LEG STYLE | CUT OUT |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.740 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.243 INCHES MINIMUM AND 0.257 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.153 INCHES MINIMUM AND 0.167 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN AND COUNTERSUNK |
| SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.720 INCHES MINIMUM AND 5.780 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.020 INCHES MINIMUM AND 1.080 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SPECIAL FEATURES | SECOND LEG 7 COUNTERSUNK MOUNTING HOLES 0.115 IN. MIN AND 0.125 IN. MAX DIA,8 COUNTERSUNK MOUNTING HOLES 0.095 IN. MIN AND 0.101 IN. MAX DIA,1 SLOT 0.243 IN. MIN AND 0.257 IN. MAX LG BY 0.153 IN. MIN AND 0.167 IN. MAX W; SECOND LEG EXTENDS ABOVE FIRST LEG BY 0.450 IN. |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 171 MIL SPEC 4TH TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |