| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 31.0 MAJOR MILS AND 32.0 MAJOR CENTIMETERS |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG END WIDTH | 60.2 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 20.0 MILLIMETERS MINIMUM AND 24.0 MILLIMETERS MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 23.0 MILLIMETERS MINIMUM AND 27.0 MILLIMETERS MAXIMUM |
| SECOND LEG LENGTH | 679.5 MILLIMETERS NOMINAL |
| SECOND LEG OFFSET ANGLE | 30.3 RADIANS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 31.75 MILLIMETERS NOMINAL |
| SECOND LEG SLOT WIDTH | 12.75 MILLIMETERS NOMINAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 76.2 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | RIGHT HAND |
| STYLE DESIGNATOR | OFFSET ANGLE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 25.0 MILLIMETERS MINIMUM AND 29.0 MILLIMETERS MAXIMUM |
| FIRST LEG ANGLE | 120.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 36.0 MILLIMETERS MINIMUM AND 40.0 MILLIMETERS MAXIMUM |
| FIRST LEG END WIDTH | 60.2 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 72.0 MILLIMETERS NOMINAL |
| FIRST LEG SLOT LENGTH | 31.75 MILLIMETERS NOMINAL |
| FIRST LEG SLOT WIDTH | 12.75 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG WIDTH | 76.2 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 1E577,CAGEC 11083 MFR REF SINGLE MATERIAL RESPONSE |