5340-01-310-2388, BRACKET,DOUBLE ANGLE

National Stock Number:
5340-01-310-2388

Federal Supply Class:
5340

National Item Identification Number:
013102388

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

47C531125P1	23991	LOCKHEED MARTIN CORPORATION
47C531125P1	79272	LOCKHEED MARTIN CORP

Techincal Specification:

CENTER SECTION HEIGHT	0.180 INCHES NOMINAL
CENTER SECTION THICKNESS	0.020 INCHES NOMINAL
CENTER SECTION WIDTH	0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.100 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.150 INCHES NOMINAL
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FIRST LEG STYLE	SQUARE
FIRST LEG THICKNESS	0.020 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
FIRST LEG HOLE DIAMETER	0.112 INCHES NOMINAL
FIRST LEG LENGTH	0.280 INCHES NOMINAL
FIRST LEG WIDTH	0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 304
MOUNTING HOLE TYPE	PLAIN AND THREADED
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.100 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.150 INCHES NOMINAL
SECOND LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
SECOND LEG HOLE DIAMETER	0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
SECOND LEG LENGTH	0.280 INCHES NOMINAL
SECOND LEG STYLE	SQUARE
SECOND LEG THICKNESS	0.020 INCHES NOMINAL
SECOND LEG WIDTH	0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
STYLE DESIGNATOR	ADJACENT ANGLES

Click here to Register for Free 30-day Trial