| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 24.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 27.7 MILLIMETERS MINIMUM AND 28.4 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 22.5 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 45.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 60.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | HC-7,CAGEC 30076 MFR REF SINGLE MATERIAL RESPONSE OR ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 24.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 24.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE DIAMETER | 13.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 63.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 22.5 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 25.5 MILLIMETERS NOMINAL |
| SECOND LEG SLOT WIDTH | 13.5 MILLIMETERS NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 110.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 45.0 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | TWO ROUND HOLES AND ONE SLOT SECOND LEG |
| STYLE DESIGNATOR | ANGLE |