| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.935 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 1.880 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/4 H111 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/6 H321 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/5 H111 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/7 H32 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| MOUNTING HOLE TYPE | COUNTERSUNK AND PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.630 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.190 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.500 INCHES NOMINAL |
| SPECIAL FEATURES | ONE ADDITIONAL HOLE LOCATED ALONG EDGE OF FIRST LEG,0.380 IN. MIN AND 0.416 IN. MAX DIA,0.620 IN. DEEP |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-22750 TY 1 MIL SPEC ALL TREATMENT RESPONSES |
| SURFACE TREATMENT | PLASTIC EPOXY AND PLASTIC POLYAMIDE |