|
|
|
National Stock Number:
5340-01-312-5946
Federal Supply Class:
5340
National Item Identification Number:
013125946
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 124E371-1 | 78022 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CENTER SECTION WIDTH | 1.250 INCHES NOMINAL | | CENTER SECTION HEIGHT | 6.750 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | FEATURES PROVIDED | NUT | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG ANGLE | 164.0 DEGREES MINIMUM AND 166.0 DEGREES MAXIMUM | | FIRST LEG LENGTH | 0.750 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.620 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.182 INCHES MAXIMUM | | FIRST LEG WIDTH | 1.250 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 164.0 DEGREES MINIMUM AND 166.0 DEGREES MAXIMUM | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SECOND LEG LENGTH | 0.750 INCHES NOMINAL | | SPECIAL FEATURES | PLATE NUTS ARE RIVETED ON WITH 2 ADDITIONAL ON CENTER LEG | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|