| BODY THICKNESS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| CORNER BEVEL LENGTH | 0.120 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | FLAT |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 1.567 INCHES NOMINAL AND 1.916 INCHES NOMINAL AND 1.917 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 2.337 INCHES NOMINAL AND 2.340 INCHES NOMINAL |
| DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH | 2.263 INCHES NOMINAL |
| DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH | 0.975 INCHES NOMINAL |
| FEATURES PROVIDED | SPECIAL MARKING |
| HOLE QUANTITY ALONG WIDTH | 14 |
| HOLE QUANTITY ALONG LENGTH | 16 |
| LENGTH | 20.900 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 TEM T651 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PERIPHERAL SHAPE STYLE | RECTANGLE, MULTI HOLES |
| MOUNTING OPENING SHAPE STYLE | UNTHREADED HOLE |
| SECURING DEVICE TYPE | THREADED FASTENER |
| SPECIAL FEATURES | ITEM HAS 6 ADDITIONAL HOLES THAT ARE CBORED 0.422 IN. DIA,THERE IS A TOTAL OF 36 HOLES THAT REQUIRE SCREWS P/N 965858-1C; ITEM ALSO HAS 2 INSTRUCTION WARNING LABELS,1 W/ITH P/N 3282256-1 & 1 LABELED "CENTER GRAVITY" WITH P/N 3282256-7,THERE IS ALSO A "CAUTION" LABEL P/N 3457150,ALL LABELS ARE APPLIED PER HP 15-17 TYPE 1 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL1A MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 TYPE 1 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-C-22751 TYPE 1 MIL SPEC 3RD TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE AND PRIMER AND PAINT EPOXY |
| WIDTH | 13.100 INCHES NOMINAL |