|
|
|
National Stock Number:
5340-01-313-3318
Federal Supply Class:
5340
National Item Identification Number:
013133318
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| C315885 | 16603 | CONTROL FLOW, INC. | | C315885 | 3X894 | CONTROL FLOW, INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.530 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.090 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL | | FIRST LEG WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG LENGTH | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 304 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL | | SECOND LEG LENGTH | 0.710 INCHES NOMINAL | | SECOND LEG WIDTH | 1.000 INCHES NOMINAL | | SPECIAL FEATURES | 2ND LEG CONTAINS 2 HOLES,0.090 IN. MIN TO 0.120 IN. MAX DIA FOR 1 HOLE,0.270 IN. MIN TO 0.310 IN. MAX DIA FOR 2ND HOLE,0.360 IN. MIN TO 0.390 IN. MAX DISTANCE BETWEEN HOLE CENTERS | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|