| CENTER SECTION THICKNESS | 4.0 MILLIMETERS NOMINAL |
| CENTER SECTION WIDTH | 45.0 MILLIMETERS NOMINAL |
| CENTER SECTION HEIGHT | 55.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 7.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 30.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG THICKNESS | 4.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 45.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 59.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | DIN6930,ST37-2N NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 24.8 MAJOR MILS AND 25.2 MAJOR CENTIMETERS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 24.8 MILLIMETERS MINIMUM AND 25.2 MILLIMETERS MAXIMUM |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 9.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 4.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 49.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 45.0 MILLIMETERS NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |