| CENTER SECTION THICKNESS | 0.074 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG ANGLE | 152.0 DEGREES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.074 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 OR STEEL COMP 347 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG ANGLE | 115.0 DEGREES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.074 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.217 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.980 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |